• It gains high adhesion and strength after application.
• High resistance to dynamic loads.
• Resistant to impact and vibration.
• Resistant to water and frost.
• Easy to prepare and apply.

a) Surface Preparation:
The surface should be dry, clean, sound and free of dust, oil, dirt or adhesion preventive materials should be cleaned from the surface and materials such as mortar and cement residues should be scraped. After the surface cleaning, the surface should be primed with Termatect primer as a single layer to increase the adhesion strength and balance the surface absorbency and should be allowed to dry for 1-2 hours. In order to increase the adhesion strength before application on exposed concrete surfaces, the surface should be primed with Termatect exposed concrete primer as a single layer and allowed to dry for a minimum of 3 hours.

b) Product Preparation:
25 kg 7001-01 Tamir Art is added into 5 - 6 liters of clean water and preferably mixed with a low speed mixer so that no lumps remain. The prepared mortar is left to mature for 5-10 minutes and mixed again for 1-2 minutes. The mixture in the container should be consumed within 30 minutes.

c) Application Method:
7001-01 Tamir Art should be applied on all surfaces to be repaired or leveled using steel trowel with equal thickness. After application, the surface should be polished with a damp sponge. If two coats are to be applied, wait 2-3 hours between coats and the first coat should be moistened in the second coat application.