• Semi-flexible and waterproof.
• Easy to prepare and apply.
• Can be applied by brush or spraying machine.
• Has long working time.
• Due to its high adhesion performance and semi-flexible structure, it forms a waterproof layer under screed and ceramic.
• It forms jointless, seamless, permanent, waterproof coating.
• Resistant to chemicals and salt solutions in soil.
• Water vapor permeable.
• Resistant to freeze-thaw cycle.

a) Surface Preparation:
It should be ensured that the cement-based surfaces in contact with water are solid, dry, carrier, dust-free and clean and at the same time in balance. The surface should be thoroughly cleaned of any oil, grease, rust and paraffin residues that may weaken the adherence and there should be no loose particles on the surface. Iron and wooden wedges on the surface should be removed and if any, active water leakages and gaps should be filled with Termatect Sealant Mortar or Structural Repair Mortar, and corners and edges should be chamfered at least 4 cm radius. Application surface is wet and wait until the application surface is wet and dry/wet. If the coating material loses water immediately and becomes matt, it is understood that the surface is not sufficiently wetted or dries quickly. In such cases, when the air is hot or the materials remain in the wind, only 10% of component B can be added to the mixed material for the first layer.

b) Product Preparation:
Liquid component B (3008 Elastico 2K) is poured into a clean application bucket and powder component A (3008 Elastico 2K) is added slowly and they are mixed with a 400-600 rpm mixer for 3-5 minutes until a homogenous and lump-free mixture is obtained. After resting for 3-5 minutes and mixing again for 30 seconds, the material is ready for use.

c) Application Method:
Prepared 3008 Elastico 2K mixture is applied in two or three layers with the help of a Thoro brush. The direction of brush application on each layer should be perpendicular to each other. Waiting time between coats varies according to ambient conditions.