• It is odorless, builds bridge between the paint and the surface, maximizes the adhesion of the paint to the surface, reduces the absorbency of the applied surface, prevents early drying of the paint, prevents color fluctuations that may occur on topcoat paint on surfaces with different absorbency. It significantly reduces paint consumption. It has high penetration and is eco- friendly.

a) Surface Preparation:
It is applied on very absorbent surfaces and/or surfaces with dusting behaviour such as plaster, limewash, low quality absorbent plastic painted surfaces that have lost their properties, aerated concrete etc.

b) Application Method:
Surfaces that 0201 Termatect Color CP will be applied must be dry, clean and self-supporting. After sandpapering on plaster and similar surfaces, after removing dust of the surface with a wet cloth/wet car wash brush, twig broom, plaster application should be started.
0201 Termatect Color CP can be applied by brush or roller after the required dilution (1 scale 0201 Termatect Color CP + 7 scales water mixture). The surface temperature during application should be between +5°C and +30°C. The surface must be protected from frost during plaster application and drying. Paint should be applied at least 4 hours after 0201 Termatect Color CP application. It should be applied without combing/polishing with brush or roller (By touring one tour with roller around surface in one direction). It is not recommended to use the plaster by diluting or combing with less water, especially for insulation purposes, and to use it on glitoline paste or solvent based primer and paint.