8005-04 Terma Floor SelfReady Screed
It is a cement based, self leveling, floor leveling and sub-ceramic balancing screed that can be applied up to 50 mm thickness, eliminating surface defects and unwanted roughness.
► Cement Based
► Self Propagating
► Has Fluid Structure
► High Adhesion Strength
► Easy To Apply
► Low Consumption
> Grey
> Public Works Pos No: 04.613/3C
• In shopping centers, shops and markets,
• For leveling the surface with a thickness of 10-50 mm before laying ceramic, granite, marble, wood, parquet, laminate, carpet and PVC coatings.
• In indoor and dry environments,
• In residences,
• In hospitals,
• In education buildings,
• It can be applied quickly and easily by hand or pump with 10 - 50 mm thickness.
• It has high flexural and compressive strength and high surface adherence.
• It is self-leveling and balanced, eliminates the roughness of the subfloor.
• Suitable for floor heating floors.
• Hardens quickly without cracking.
• Can be applied on old concrete floors.
• Economical.
a) Surface Preparation:
The application surface should be cured. The application surface should be cleaned from dust, oil, tar, pitch, paint, silicone, curing agent, detergent and molding oil. On very worn concrete surfaces, after adherence is increased with cement slurry added Termatect Latex, primer application can be started. The surface should be solid, dry and free of cracks. How much level difference on the application surface should be determined by using tools such as water level, levelling instrument. Prime the surface with Termatect Floor Primer to increase resistance to absorbency or smoothness.
b) Product Preparation:
25 kg 8005-04 Terma Floor Self ready floor leveling screed (3-10 mm) is added slowly into approximately 5 - 5.5 liters of clean water and preferably mixed with a low speed mixer so that no lumps remain. The prepared mortar is left to mature for 2-3 minutes and mixed again for 1-2 minutes. The mixture in the container should be consumed in about 30 - 35 minutes.
c) Application Method:
Following the priming of the surface, 8005-04 Terma Floor Self application is started after at least 30 minutes depending on the weather conditions. Empty the prepared fluent mortar to the surface. To make the spreading process easier, make some corrections with the notched trowel and adjust the thickness. During the application, use spiked roller or nailed shoes to prevent air bubbles in the product. In large area applications, continuous application is required to prevent cold joints. Therefore, in order to ensure the continuity of the pouring process, material should be prepared in more than one bucket and the application should be completed by pouring it onto the ground one after the other.
“ We will continue to seek superior quality and superior service with the power we receive from you. ”
